Posted: 02/December/2007 at 1:40pm | IP Logged

If you ever get the airbag warning light come on for removing an airbag or other reason you cannot make it turn off without it being reset. Thanks to Slymaster for this reset procedure.

Please note, this will only work if the airbag fault that originally caused the light to iluminate has been rectified.

Reset Procedure
(a) Switch OFF the radio & Ignition
(b) Turn Ignition ON (Position II)
(c) The airbag warning light will stay on for 7 seconds and then switch off – as soon as it does
turn OFF the ignition (within 1 second of the light switching off)
(d) Wait at least 5 seconds
(e) Repeat steps (a) to (c) two more times – this is important to make sure it registers with
different modules in the car
(f) Turn ON ignition, wait 2 seconds
(g) Switch OFF Ignition (Position 0) and wait 1 second
(h) Switch ignition back ON.
(i) Airbag light should now remain unlit as long as the fault(s) causing are also addressed